Smart Tag Demo

Smart Tag Demo is a demonstration application of AIOI Systems Company’s visible RFID smart tag (ST1020/ST1027) or SmartCard (SC1029L). In order to use this demo, you must have Smart Tag.

Operation Condition:

* NFC-enabled Smart Phone

* Android 2.3.3 or later version

(Even after meeting the above conditions, some or all of the functions may not work in some cases because of the smart phone’s specifications.)

How to Use:

When each menu option is selected and the reader/writer is touched with Smart Tag, the process starts. To perform another operation, first release the tag from the reader/writer.

*Show demo images

Sample images will be displayed on Smart Tag starting from the first registered image. The image will switch each time you touch.

*Show snapshot

The camera takes a picture and it is displayed on Smart Tag. (After taking a picture, touch Smart Tag.)

*Show text

Enter a sentence and show it on the display area of Smart Tag.

When you touch with your finger [Touch here to input . . .] the input screen will be displayed.

Go to the next line after about 10 characters per line.

Up to 4 lines can fit into the display. (It takes a few seconds to communicate with Smart Tag.)

*Show Selected Image

The images saved in Smart phone unit can be shown on the screen of Smart Card/Tag (※When selecting file, there are Filer/Image applications such as Google Drive that cannot be used.)

*Register current image

Register the image displayed on Smart Tag. Specify numbers 1 ~ 12, then touch.

※Smart tag only.

*Show Registered image

Images that have been registered in Smart Tag will be displayed. An image will switch each time you touch.

※It is possible to specify only "1" or "2" on SmartCard.

*Write text

Write text into Smart Tag memory. Touch “Tap here to input…” to change to Entry screen.

*Read text

Read the text in Smart Tag memory and display on the screen.

*Save URL

Save the URL in the Smart Tag memory. The web address can be changed by touching the URL on the screen.

*Open URL

Read the URL that you saved in the Smart Tag memory and open the web. (When Smart Tag is touched, the web browser starts to access the page.)

*Show ‘BugDroid’

The Android logo will display on Smart Tag.

(It takes a few seconds to communicate with Smart Tag.)

*Clear display

Clear Smart Tag display.</br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br>